ไฮไลท์
IC เบอร์ XL4015 พร้อมแผ่นระบายความร้อน และโวลต์มิเตอร์สำหรับวัดแรงดันไฟ Input/Output
ข้อมูล
น้ำหนัก
บาร์โค้ด
ลงสินค้า
อัพเดทล่าสุด
รายละเอียดสินค้า
โมดูลเรกูเลตแปลงไฟจาก 4-38VDC เป็น 1.25-35V จ่ายกระแสได้สูงสุด 5A ใช้ IC เบอร์ XL4015 พร้อมแผ่นระบายความร้อน และโวลต์มิเตอร์สำหรับวัดแรงดันไฟ Input/Output 
Feature:


The DC-DC Adjustable Step Down Converter Module has large power, high efficiency, low-ripple. With power indicator, on-board voltmeter. The voltmeter can calibrate automatically. The measure can be changed between input and output voltage, with indicator. The voltmeter can also be shutdown. The board uses connection terminal for easy wiring.
Built in thermal shutdown function
Built in current limit function
Built in output short protection function

Specification:

Better than 2596, easy to 4A 50W, up to 75W adding heat sink
Input voltage: 4V ~ 38V (not more than 38V)
Output voltage: 1.25V ~ 36V (adjustable)
Output current: 0A ~ 5A (recommended below 4.5A)
Output power: recommended use below 75W (add heat sink when more than 50W)
Operating temperature: -40°C ~ +85°C
Operating frequency: 180KHz
Conversion efficiency: Up to 96% (based on input and output voltage, current, pressure)
Voltmeter range: 0V ~ 40V
Voltmeter error: ±0.1V (NOTE: To ensure the accuracy, keep the input above 4.5V)
Load regulation: S (I) ≤0.8%
Voltage regulation rate: S (u) ≤0.8%
Power indicator: Yes
Short circuit protection: Yes (limit current 8A)
Over temperature protection: Yes (shutdown output automatically after over temperature)
Input Reverse Polarity Protection: None (cascade high current diode if required)
Wiring: IN+/- Input, OUT+/- Output
Size: 66 x 39 x 18mm

Voltmeter calibration method:

1. Onboard voltmeter shows that the output voltage, long press the right button 2 seconds to loosen, voltmeter, and the output voltage indicator light [OUT] synchronous flash, at this time into the output voltage regulation mode; Similarly, when the input voltage IN the voltmeter display, long press the right button 2 seconds to loosen, voltmeter, and the input voltage indicator light [IN] synchronous flash, at this time into the input voltage adjustment mode.

2. Light touch button on the right side, the voltage value is adding up a unit; Press the left button, minus a unit; Due to a unit of voltage is less than 0.1 V, so you need to press the 1-5 consecutive can see the voltmeter change 0.1 V, the concrete continuous button several times depends on the current display voltage, current shows that the higher the voltage, the fewer the number of press.

3. After the voltage adjustment, long press the right button for 2 seconds, release, to exit the output voltage calibration mode, all the parameters set to automatically power down saving.

The DC/DC buck module applications the input voltage is higher than the output voltage of the buck field, such as battery, power transformer, DIY adjustable regulated power supply, LCD Monitor and LCD TV, portable instrument power supply, telecom/networking equipment, 24V vehicle notebook power supply, industrial equipment buck. 12V buck to 3.3V, 12V buck to 5V, 24V buck to 5V, 24V buck to 12V, 36V buck to 24V etc.

Note:

The input voltage should be more 1.5V than output!

Package included:

1 x 5A 75W DC-DC adjustable step down converter module ( with heat sink and screws )







เงื่อนไขอื่นๆ
Tags

วิธีการชำระเงิน

สินค้าคุณภาพสูง จัดส่งทันใจ แจ้งการชำระเงิน 

และแทรค สินค้าด้วย ระบบ SMS

     ซื้อสินค้าได้ตลอด 24 ชั่วโมง เราจัดส่งสินค้าทาง J&T แพ็คสินค้าอย่างดีปลอดภัย ส่งถึงมือลูกค้าอย่างแน่นอน
ถ้าแจ้งโอนก่อนเวลา 18
:0น. จัดส่งสินค้าในตอนเช้าของวันถัดไป 12.00 
ตรวจสอบ แทรกกิง 
https://www.jtexpress.co.th/

ค่าจัดส่งแบบ J&T
-- ค่าขนส่งแบบเหมาจ่าย 60 บาทต่อครั้งการส่ง  --

สอบถามสินค้าทาง Line 
เพิ่มเพื่อน
LINE : @igetso

ระยะเวลาจัดส่ง

มื่อทางร้านได้รับการแจ้งชำระสินค้าเรียบร้อยแล้วจะส่งของภายในวันถัดไป

  • จะรับภายใน วัน พื้่นที่ห่างได้รับภายใน 1และ วัน ในบางพื้นที่  *ขึ้นอยู่กับการจัดส่ง ของ J&T
  • ระบบจะส่งเลขแทรค J&T ไปให้ทาง SMS ส่งตรงถึงโทรศัพท์มือถือ

การจัดส่ง

  • โอนเงินและแจ้งโอนก่อนเวลา 18.00 น. จัดส่งสินค้าในวันถัดไป (จันทร์-วันเสาร์)
  • โอนเงินวันเสาร์ จัดส่งสินค้า ในวันจันทร์
  • โอนเงินและแจ้งโอนอาทิตย์ก่อน 18.00น จัดส่งสินค้าในวันจันทร์
  • เมื่อจัดส่งแล้วทางร้านแจ้งเลขแทรคไปให้ทาง E-Mail ที่แจ้งไว้ตอนทำรายการสั่งซื้อ
  • I GET SOLARCELL  แจ้งเลขแทรคทาง sms ส่งตรงถึงโทรศัพท์มือถือ ทางเบอร์โทรศัพท์มือถือ ที่แจ้งไว้ตอนทำรายการสั่งซื้อ

การตรวจสอบเลขแทรคสินค้า

I GET SOLAR CELL ส่ง เพิ่ม ความชัวร์ สะดวกและรวดเร็ว อัพเดททุกสถานะผ่านทาง SMS จากระบบส่งตรงถึงมือลูกค้า

  • 1.เมื่อระบบตรวจสอบการชำระเงินแล้ว จะมี SMS ส่งไปแจ้งที่เบอร์มือถือที่กรอกตอนสั่งซื้อสินค้า เป็นการยืนยันการชำระเงินเรียบร้อย
  • 2.เมื่อจัดส่งสินค้าแล้ว ระบบจะส่งข้อมูลผ่านทาง SMS แจ้งเลขแทรค สินค้า ไปถึงมือลูกค้าทาง SMS หรือสามารถตรวจสอบเลขแทรคได้ทาง Email

วิธีการชำระเงิน

    ชำระเงินผ่านธนาคาร OnLine ไม่เสียค่าทำเนียม เพื่ออำนวยความสะดวกให้กับลูกค้า การทำธุรกรรมของธนาคารต่างสาขาหรือต่างธนาคาร ผ่าน OnLine ไม่เสียค่าทำเนีย

วิธีการชำระเงิน
ชำระเงินผ่านธนาคาร OnLine ไม่เสียค่าธรรมเนียมจ่ายผ่าน QR code เพื่ออำนวยความสะดวกให้กับลูกค้า การทำธุรกรรมของธนาคารต่างสาขาหรือต่างธนาคาร ผ่าน OnLine 
ไม่เสียค่าธรรมเนียมจ่ายผ่าน QR code


 

ธนาคารทหารไทยธนชาต จำกัด (มหาชน) สาขาเทสโก้ โลตัส พลัสมอลล์ บางใหญ่ กระแสรายวัน
พร้อมเพย์ สาขา- tax_id
Scan this!
บริษัท ไอเก็ตโซลูชั่นส์ จำกัด
012-xxxxxx-7
Accept All Banks | รับเงินได้จากทุกธนาคาร
รายการสั่งซื้อของฉัน
เข้าสู่ระบบด้วย
เข้าสู่ระบบ
สมัครสมาชิก

ยังไม่มีบัญชีเทพ สร้างบัญชีใหม่ ไม่มีค่าใช้จ่าย
สมัครสมาชิก (ฟรี)
รายการสั่งซื้อของฉัน
ข้อมูลร้านค้านี้
ร้านigetsolarcell
igetsolarcell
โซล่าเซลล์ งาน DIY สำหรับใช้งานในเมือง แบตเตอร์รี่ li-ion, Li-Po, LiFePO4 ,ปั๊มลม,ปั๊มน้ำ, พัดลม
เบอร์โทร : 0962472707
อีเมล : thaiemc@hotmail.com
ส่งข้อความติดต่อร้าน
เกี่ยวกับร้านค้านี้
สินค้าที่ดูล่าสุด
ดูสินค้าทั้งหมดในร้าน
สินค้าที่ดูล่าสุด
บันทึกเป็นร้านโปรด
Join เป็นสมาชิกร้าน
แชร์หน้านี้
แชร์หน้านี้

TOP เลื่อนขึ้นบนสุด
พูดคุย-สอบถาม